AIMS Dual Sensing Smart Battery Isolator 300 Amp Automatic
$108.90
In stock
Questions? Call (727) 761-7772
SKU BATISO300
Overview
AIMS BATISO300 Overview:
The Aims BATISO300 Dual Sensing Smart Battery Isolator monitors both the starting battery and the auxiliary Battery. Once either battery voltage reaches 13.2 volts, the solenoid automatically connects the auxiliary battery to the charging system. A benefit of the dual sensing feature is the ability for a user to charge the main battery from a solar panel or an external battery charger on the auxiliary battery, once the auxiliary battery reaches 80% state of charge (13.2V). This ensures you never have a drained starter battery again. The isolator is also automatic and is based on voltage, which saves installation time. When the entire battery system drops below 12.7 volts the solenoid opens and isolates the starter battery from the auxiliary battery.
- Cost-effective protection against a flat start battery
- The Smart Battery Isolator monitors both battery voltages
- A safe way to charge your auxiliary battery while driving
- No need to tie to ignition, save installation time
- Ability to use an external charging device to charge main battery through aux battery
AIMS BATISO300 Specifications:
- System voltage: 12V
- Auto-on voltage: >13.2V
- Auto-off voltage: 12.7V
- Turn on delay: 5 sec
- Turn off delay: 10 sec
- Max continuous current: 300 amp
- Standby current: <5mA
- IP65 splash proof
- Weight: 2 lbs
DUAL SENSING SMART BATTERY ISOLATOR
Show the full description
Dual Sensing Smart Battery Isolator monitors both the start battery and the auxiliary. If the unit detects that either battery has exceeded 13.2 volts, then the isolator will connect them. The benefit of the dual control enables the user to charge the main battery from a solar panel or battery charger on the auxiliary battery. NOTE: Our smart isolator may also be used as a standard ignition switch isolator. Simply remove the smart battery monitor (black box) from the isolator and connect the isolator input to the ignition.
FAULT INDICATION
The LED may stay ON for a period after the vehicle is turned OFF. Should a fault occur, the LED on the manual switch is set to notify the operator of the fault. The LED will flash with the following sequences:
Code 1 2 flashes Over-Voltage > 15.5 V Code 2 3 flashes Voltage drop < 12.7 V
SKU:
BATISO300
Specifications
| Weight | 2 lb |
|---|
| Brand | AIMS |
|---|---|
| SKU | BATISO300 |
Questions and answers
No questions about this product have been answered yet. Ask the first one.
Compare with similar items
| Overview | ||||
|---|---|---|---|---|
| Price | $108.90 | $330.00 | $195.00 | $165.00 |
| Availability | In stock | In stock | In stock | In stock |
| Brand | AIMS | REDARC | REDARC | REDARC |
| Electrical | ||||
| Nominal voltage | Not listed | 12 V | 12 V | 12 V |
| Physical | ||||
| Weight | 2 lb | 1.3 lb | 1 lb | 1 lb |
| Warranty and compliance | ||||
| Warranty | Not listed | Not listed | Not listed | Not listed |
| Identifiers | ||||
| SKU | BATISO300 | SBI212 | SBI12D | SBI12 |
