Image 1 of 3
Overview
Connecting directly to the trailer plug, the BCDC1212T provides 3-stage battery charging for optimum battery charge, protecting the truck’s start battery from discharge while charging the auxiliary battery responsible for operating winches, hydraulic pumps, dump trailers, liftgates and boat trailers.
PERFECT FOR CHARGING TIPPER TRAILER BATTERY AND LIFTGATE CHARGING
This dump trailer charger is compatible with all battery makes and chemistries, including Standard Lead-Acid, Calcium, Gel, AGM and Lithium LiFeP04.
It operates in a 12- or 24-volt vehicle and is 12 Amp input current limited to charge your secondary battery banks to 100% state of charge while on the move.*
- large capacity battery banks may require a few cycles to fully charge.
EASILY INSTALLED IN THE TRAILER’S NOSE CONE
Show the full description
The BCDC1212T ensures little to no mains charging is required for your trailer battery, meaning you can charge the trailer battery while you drive and reduce the need to plug into the socket to top-up battery charge.
The BCDC1212T comes pre-wired with wiring harness allowing easy installation into any typical trailer battery setup, or other trailers where the secondary battery’s charging current is drawn from the 12V Auxiliary Power available on a pre-installed, suitably rated, trailer plug and towing harness.
AUSTRALIAN MADE AND PROVEN
Proven to operate under extreme heat of up to 176°F, this trailer battery charger is sealed to eliminate the risk of dust or water ingress, and is made in Australia by Australia’s leading battery charging and overlanding accessories company.
SPECIFICATIONS
WARRANTY: 2 Years GTIN_BARCODE: 9338628006434 BRAND: REDARC BATTERY CHEMISTRY: Standard Lead Acid, Calcium content, Gel, AGM or LiFePO4 type only CONTINUOUS RATING: 12A POWER TYPE – AC DC: DC TO DC NOMINAL OUTPUT POWER: 147W (12V vehicle) / 294W (24V vehicle) INPUT FUSE RATING: 15A to 23A (Not supplied) SUITABLE FOR 12V SYSTEMS: Yes SUITABLE FOR 24V SYSTEMS: Yes MPPT SOLAR REGULATOR: No CABIN/ CANOPY INSTALL: Yes NO LOAD CURRENT: <100mA TRAILER INSTALL: Yes ENGINE BAY INSTALL: No MAX. CHARGING VOLTAGE: 15.3V OUTPUT FUSE RATING: 30A (Not supplied) OPERATING TEMPERATURE: 5°F to 176°F OUTPUT VOLTAGE: 12V DC MAX. RATED OUTPUT CURRENT: 11A (12V vehicle) / 20A (24V vehicle) INPUT VOLTAGE: 9 – 32V STANDBY CURRENT: <8mA CONNECTOR TYPE: Bare wire WEIGHT: 30 oz (850 g) WIDTH: 4.7″ (120 mm) HEIGHT: 1.5″ (37 mm) DEPTH | LENGTH: 6.5″ (165 mm)
SKU:
BCDC1212T
Specifications
| Weight | 1.9 lb |
|---|
| Brand | REDARC |
|---|---|
| SKU | BCDC1212T |
Questions and answers
No questions about this product have been answered yet. Ask the first one.
Compare with similar items
| Overview | |||
|---|---|---|---|
| Price | $345.00 | $690.00 | $535.00 |
| Availability | In stock | In stock | In stock |
| Brand | REDARC | REDARC | REDARC |
| Physical | |||
| Weight | 1.9 lb | 2.2 lb | 2.2 lb |
| Warranty and compliance | |||
| Warranty | Not listed | Not listed | Not listed |
| Identifiers | |||
| SKU | BCDC1212T | BCDC1250D | BCDC1225D |
